Castle Creations Phoenix-10 Brushless ESC

This is the Phoenix-10 Brushless ESC made by Castle Creations.

Key Features

Extremely low resistance (.013 Ohm)
High rate (11kHz) switching
Up to 10A continuous current with proper air flow, 15A surge
Five to eight cells with four micro servos
Up to ten cells with three micro servos
16 cells max with BEC disabled
Dynamic braking ensures folding props fold properly
BEC (1.5A) provides power to receiver and servos-eliminates need for a separate receiver battery

User programmable features:
Low voltage cutoff
Auto-LiPo setting automatically sets 3V/cellfor 2-4 cell LiPo packs
Over-current protection
Brake type
Throttle range
Timing advance
Cutoff type
Soft start ramp up
Runs motor in forward or reverse
Auto motor in cutoff with reset
Safe power on arming program ensures motor won't accidentally turn ON
Low torque soft start prevents damage to fragile gearboxes
Auto Shut Down when signal is lost or radio interference becomes severe

Specs

Length: 1" (25.4mm)
Width: 3/4" (19mm)
Height: 1/8" thick (3mm)
Wire Length: 4" (102mm)
Motor Ends 5.5" (140mm)
Battery End 5.5" (140mm) servo wire with Universal connecter