Axial SCX24 Deadbolt 1/24 4wd RTR Rock Crawler Green
The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Key Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Included
SCX24 Deadbolt 1/24 Scale 4WD Truck
Axial AX-4 2.4GHz 3-channel radio
AA transmitter batteries
350mAh 2S 7.4V LiPo battery
USB LiPo charger
Product Manual
Specs
Scale: 1/24
Completion Level: Redy to Run
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Weight: 0.5lb (.22kg)
Requires
Nothing! Everything needed to drive is in the box.
Equally at home on creative indoor trails and challenging outdoor terrain, this Deadbolt™ is eager for adventure almost anywhere — the 1/24 scale SCX24™ chassis proves that BIG fun comes in small packages! The chassis shares many familiar features with its highly successful 1/10 scale SCX10™ inspiration. It has rugged steel C-channel frame rails with bracing and officially licensed Nitto® Trail Grappler tires on KMC® XD Machete wheels, providing the toughness and tread to tackle off-road challenges (and the freedom to face them down on-road, too). The SCX10 hinged body system has been carried over into this rig as well…so you can change the battery or check out other on-board components with barely a break in the action. You expect solid performance from Axial® and the SCX24™ Deadbolt™ delivers, with engineering and equipment that pulls the greatest potential from its compact size. The included Dynamite™ 88T brushed electric motor supplies the torque you need to get up and over most obstacles. And despite the dimensions, it’s a pretty capable rock crawler, too! We've also included extra suspension links for adjusting your wheelbase length.
Led Lights Included
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-Link Rear Suspension
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 Machete Crawl Wheels
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
Hinged Body System
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
Worm Gears
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
Durable Steel Axles
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
Splined Drive Shafts
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
Coilover Shock Absorbers
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you’ve known and expect from Axial.
Full Ball Bearings
Just because the SCX24™ is smaller in size doesn’t mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
Axial AS-1 Servo
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
- Includes radio system, ESC and transmitter batteries
- Includes motor and on-board LiPo battery
- Realistic narrow-stance rock crawler body in olive green or red
- Molded roll cage with realistic light bar
- Realistic driver figure and many other scale details
- Officially licensed KMC XD229 Machete Crawl wheels
- Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
- Full-time 4WD
- Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
- Steel front and rear axles, front stub axles and dogbones provide strength and durability
- Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
- Front and rear axles consist of a two-piece, molded plastic solid axle design
- 3-Link front and 4-link rear suspension supply optimal handling
- Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
- Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
- Two LEDs in the front bumper for night driving
- Approximate Assembly Time: No assembly required
- Batteries: 7.4V 350mAh 30C LiPo
- Body: Painted and trimmed Axial Deadbolt
- Charger: USB LiPo charger
- Chassis: Stamped steel rails
- Completion Level: Ready-To-Run
- Differential: Worm gear 16T/4T
- Drivetrain: 4WD
- Gear Pitch: 32-Pitch
- Ground Clearance: 1.06" (27mm)
- Height: 4.73" (120.2mm)
- Length: 7.8" (199.5mm)
- Motor Size: 180
- Motor Type: Brushed
- Pinion: 10T
- Radio: AX-4 2.4GHz 2-channel
- Servos: AS-1 steering servo
- Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
- Size/Scale: 1/24
- Speed Control: AE-6 ESC receiver/combo
- Spur Gear: 55T
- Suspension: Solid axle, front and rear
- Tire Diameter: 2.0" (51mm)
- Tire Tread: Nitto Trail Grappler M/T, large block tread
- Track: 3.9" 99.5mm)
- Vehicle Type: Crawler
- Water-Resistant: No
- Weight: 0.5lb (0.22kg)
- Wheel Diameter: 1.0" (26mm)
- Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl
- Wheel Width: 0.48" (12.4mm)
- Wheelbase: 5.25" (133.5mm)
- Width: 3.9" (99.5mm)
- (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
- (1) Axial AE-6 ESC/receiver combo (installed)
- (1) Dynamite® 88T brushed electric motor (installed)
- (1) Axial AS-1 steering servo (installed)
- (1) Axial® AX-4 2.4GHz 2-channel radio
- (4) AA transmitter batteries
- (1) 350mAh 2S 7.4V LiPo battery
- (1) USB LiPo charger
- (1) Product Manual
- Nothing! Everything you need to begin having fun with your 1/24 scale Deadboly is Included!
Manufacturer | Axial |
---|---|
MPN | AXI90081 |
UPC | 605482298701 |