E-flite 70mAh 1S 3.7V 14C LiPo Battery

Replacement battery for Blade Scout CX Helicopter.

Specs

Battery Type: LiPo
Capacity: Less than 300mAh
Configuration: 1S
Connector Type: Ultra Micro
Height: 0.10 in (2.54mm)
Length: 1.30 in (33mm)
Maximum Continuous Current: 1.0A
Maximum Continuous Discharge: 14C
Voltage: 3.7V
Weight: 0.18 oz (5.1 g)
Width: 0.46 in (11.7mm)

CAUTION

Fire hazard! Keep away from small children and animals

Safety Instructions

Use specific LiPo charger only.
DO NOT use a NiCd or NiMh charger.
Never charge batteries unattended.
Some LiPo chargers on the market may have technical deficiencies that may cause it to charge the LiPo batteries incorrectly or at an improper rate.
It is your responsibility solely to assure the charger you purchased works properly.
If at any time you witness a battery starting to balloon or swell up ,discontinue charging process immediately.
Disconnect the battery and observe it in a safe place for approximately 15 minutes.
Since delayed chemical reaction can occur, it is best to observe the batter as a safety precaution.
Wire lead shorts can cause fire!
If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes, additionally, if a short occurs and contact is made with metal (such as a ring on your finger), severe injuries may occur due to the conductibility of electric current.
A battery can still ignite even after 10 minutes.
Charge in an isolated area, away from other flammable materials on a concrete surface outside of buildings.
Let the battery cool down to ambient temperature before charging.
Do not charge batteries packs in series, charge each battery pack individually.
Failure to do so may result in incorrect battery recognition and charging functions; overcharging may occur and fire may be the result.