E-flite 800mAh 2S 7.4V 30C LiPo Battery Pack

E-flite High-Power lithium polymer batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there's a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.

Key Features

Fits the Blade CX Family of helicopters

Specs

Battery Type: LiPo
Capacity: 800mAh
Configuration: 2S
Connector Type: JST
Height: 0.50 in (13mm)
Length: 2.75 in (70mm)
Width: 1.00 in (25mm)
Maximum Charge Current: 0.8A
Maximum Continuous Current: 24A
Maximum Continuous Discharge: 30C
Voltage: 7.4V Weight: 1.6 oz (45 g)
Wire Gauge: 18 AWG

WARNING: Lithium Polymer (LiPo) batteries are significantly more volatile than the alkaline, Ni-Cd or Ni-MH batteries used in RC applications. All instructions and warnings included with the battery are to be followed exactly. Mishandling of LiPo batteries can result in fire. By handling, charging or using this LiPo battery you assume all risks associated with LiPo batteries. If you do not agree with these conditions, return this LiPo battery in new, unused condition to the place of purchase immediately.

CAUTION

Fire hazard! Keep away from small children and animals

Safety Instructions

Use specific LiPo charger only.
DO NOT use a NiCd or NiMh charger.
Never charge batteries unattended.
Some LiPo chargers on the market may have technical deficiencies that may cause it to charge the LiPo batteries incorrectly or at an improper rate.
It is your responsibility solely to assure the charger you purchased works properly.
If at any time you witness a battery starting to balloon or swell up ,discontinue charging process immediately.
Disconnect the battery and observe it in a safe place for approximately 15 minutes.
Since delayed chemical reaction can occur, it is best to observe the batter as a safety precaution.
Wire lead shorts can cause fire!
If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes, additionally, if a short occurs and contact is made with metal (such as a ring on your finger), severe injuries may occur due to the conductibility of electric current.
A battery can still ignite even after 10 minutes.
Charge in an isolated area, away from other flammable materials on a concrete surface outside of buildings.
Let the battery cool down to ambient temperature before charging.
Do not charge batteries packs in series, charge each battery pack individually.
Failure to do so may result in incorrect battery recognition and charging functions; overcharging may occur and fire may be the result.