E-flite Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

This is the Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet made by E-flite.

Key Features

Designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32 to 48 ounces (910 to 1360 grams), 3D airplanes weighing 28 to 36 ounces (790 to 1020 grams), or models requiring up to 375 watts of power
Good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics
Equivalent to a 10-size glow engine for 32-48 ounce (910 to 1360 g) airplanes
Ideal for 3D airplanes weighing 28-36 ounces (790-1020 g)
Ideal for models requiring up to 450 watts of power
High-torque, direct-drive alternative to inrunner brushless motors Includes mount, prop adapters and mounting hardware
External rotor design-5mm shaft can easily be reversed for alternative motor installations
Slotted 12-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation

Specs

Type: Brushless outrunner motor
Size: 10-size
Bearings or Bushings: Ball bearings
Wire Gauge: 16
Recommended Prop Range: 10x5-12x6
Voltage: 7.2-12
RPM/Volt (Kv): 1100
Resistance (Ri): .043 ohms
Idle Current (Io): 2.10A @10V
Continuous Current: 32A
Maximum Burst Current: 42A (15 sec)
Cells: 6-10
Ni-MH/Ni-Cd or 2-3S Li-Po Speed Control: 35-40A brushless
Weight: 122 g (4.3 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 5mm (.20 in)
Overall Length: 43mm (1.60 in)

Requires

40A ESC 6- to 10-cell Ni-MH/Ni-Cd or 2-3S Li-Po
10x5 to 12x6 electric props