E-flite UMX A-10 Thunderbolt II 30mm EDF Jet BNF Basic with AS3X and SAFE Select, 562mm

This is the UMX A-10 Thunderbolt II 30mm EDF Jet BNF Basic with AS3X and SAFE Select, 562mm made by E-flite.

The E-flite® UMX™ A-10 Thunderbolt II Twin 30mm EDF ultra micro jet is the most practical and easiest to fly A-10 RC model yet! New upgrades make this replica of the iconic U.S. Air Force aircraft easier for a wider variety of experienced pilots to enjoy — including those with limited EDF experience. The BNF® Basic model’s industry-leading Spektrum™ 2.4GHz technology binds to your 5+ channel DSMX®/DSM2® transmitter for full 4-channel control, plus the benefits of exclusive AS3X® and optional-use SAFE® Select technologies. It’s 100% factory-assembled and ready to deliver an authentic A-10 jet flying experience almost immediately. The fully-molded airframe features a factory-applied "desert camo" trim scheme and is strengthened with a carbon fiber reinforced fuselage and nose. Factory-installed twin brushless power systems feature more powerful 2S and 3S-compatible outrunner motors with larger diameter 30mm fans, for improved vertical performance and speed compared to other models in its class — plus longer-than-average EDF flight times when using the recommended 450–850mAh LiPo batteries. Use the included fixed landing gear with steerable nose wheel to taxi, take off and land on paved, packed dirt or grass surfaces at large parks and fields. Or leave the landing gear off for more speed and vertical performance plus easy over hand launches and landings on grass. With the A-10 Thunderbolt II Twin 30mm EDF, you can start flying your first mission within minutes!

Key Features

Scale replica of the iconic aircraft flown by the U.S. Air Force for Close Air Support and other missions
The easiest to fly and best handling ultra micro A-10 EDF (Electric Ducted Fan) jet model yet
Improved vertical performance and speed compared to other ultra micro class EDF models
More powerful 2S and 3S-compatible outrunner motors with larger diameter 30mm fans
Fits 450–850mAh LiPo batteries for a wide range of performance and flight times
Strengthened airframe including a carbon fiber reinforced fuselage and nose
Real-time battery voltage telemetry via compatible Spektrum™ transmitters
Spektrum receiver with industry-leading 2.4GHz DSMX® technology
The unmatched stability and locked-in feel of exclusive AS3X® technology
Easy to fly with optional-use SAFE® Select flight envelope protection
Completely factory-assembled and ready to fly right out of the box
Stronger removable landing gear with steerable nose wheel
Full 4-channel control with functional dual rudders
Factory-applied "desert camo" trim scheme finish

Specs

Approximate Assembly Time: None Required
CG (Center of Gravity): 1.25 - 1.34" (32 - 34mm) back from the leading edge of wing at the root
Completion Level: Bind-N-Fly Basic
Fan Size: 30mm EDF
Flaps: No
Landing Gear: Fixed, tricycle type
Material: EPO
Motor Size: 8800Kv Outrunner 8-Pole
Power Type: Electric
Length: 20.31" (516 mm)
Weight: 4.2oz (120g) w/o battery, 6.8oz (192g) with 850mAh 3S 30C battery
Recommended Motor Battery: 3S 850mAh
Skill Level: Level 2
Technology: Smart
Under 250g FAA Weight Limit: Yes
Wing Loading: 83.7sq in (5.40 sq dm)
Wingspan: 22.12" (562 mm)

Included

One (1) E-flite® UMX™ A-10 Thunderbolt II Twin 30mm EDF with:
Two (2) Brushless Outrunner Motors (installed)
Two (2) 30mm EDF units (installed)
One (1) Spektrum Receiver with (2) Brushless ESCs (installed)
One (1) Product Manual

Requires

One (1) Full-range 5+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter
One (1) 2S 7.4V or 3S 11.1V 450–850mAh 30+C LiPo with IC2® Connector
One (1) Compatible LiPo Charger and Charge Lead
The SPMX8503S30 Battery Requires G2 Compatible Charger and IC2-IC3 Adpater (SPMXCA320)

Note: Spektrum IC2 Connectors and Charge Leads ARE NOT Compatible with EC2 Connectors