Estes Taser Flying Model Rocket Launch Set

This is the Taser Flying Model Rocket Launch Set by Estes.

The Taser is a stunning rocket that's capable of subduing anything out there that's dangerous! The Taser Launch Set from Estes is an exciting, radically designed high altitude rocket launch set from the Beginner series. The rocket kit features a brightly colored one piece body tube, molded plastic fin set and bullet shaped nose cone. Simply glue a few rocket pieces together, apply the colorful self-stick decals and in less than an hour you'll be ready for the launch pad!

The Taser rocket is 16.5 inches tall. With its custom three-fin design, it climbs to an outta sight altitude of over 1,000 feet. A bright-colored 12 inch pre assembled parachute returns this rocket back to the launch site. You'll be ready in minutes for another extreme launch experience!

LAUNCH SYSTEM includes Astron II Launch Controller and Astron II Launch Pad.

Dimensions

Length: 16.5 in. (41.9 cm)
Diameter: 0.98 in. (25 mm)
Estimated Weight: 1.5 oz. (42.5 g)
12" Parachute Recovery
1/8" Launch Lug

Recommended Engines

A8-3(First Flight)
B4-4
B6-4
B6-6
C6-5
C6-7

Projected Max Altitude: 1000 ft. (305 m)

Features

This rocket kit is Level 1 (for beginners and everyone). All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. 

E2X - Easy to Assemble

Supplies Required for Assembly
Scissors
Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape

Finishing Supplies Required

Wood Filler
Sealer/Primer
Paint

Equipment and Supplies required for launching:

Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code