Estes New Shepard Flying Model Rocket Kit Blue Origin
This is the Blue Origin New Shepard Flying Model Rocket Kit by Estes.
The Estes New Shepard is a 1/66th scale model of the Blue Origin New Shepard launch vehicle. It flies to altitude on a C5-3 or C6-3, and is capable of as much as 400 ft. It too, after deploying the capsule, falls through the atmosphere under a large parachute to gently touch down. Like the Blue Origin New Shepard, you can fly the Estes New Shepard again and again.
In 1961 Alan Shepard became the first American in space. A decade later Alan Shepard walked on the moon. He carved the frontiers of space exploration so that later we could pave the path. It’s with that legacy in mind that the New Shepard came to be. The Estes New Shepard aims to bring that feeling of exploration, and the excitement of a launch, to the hands of everyone. The Blue Origin New Shepard stands 59 ft. tall, fires its BE-3 engine for 110 seconds producing 110,000 lbs of thrust. It’s marked by name, and with the iconic Blue Origin feather across the airframe. The vehicle ascends through the clouds, more than 60 miles above the ground, and into the vacuum of space. Here, the passengers experience weightlessness. The capsule, containing the newly minted astronauts, then falls through the atmosphere under parachutes and touches down lightly on a cloud of dust The boosters that kick up the cloud allow the capsule to touch down extremely lightly, at a mile an hour or less. The Estes New Shepard is a 1/66th scale model of the Blue Origin New Shepard launch vehicle. It flies to altitude on a C5-3 or C6-3, and is capable of as much as 400 ft. It too, after deploying the capsule, falls through the atmosphere under a large parachute to gently touch down. Like the Blue Origin New Shepard, you can fly the Estes New Shepard again and again.
Dimensions
Length: 10.34"(26.3cm)
Diameter: 1.78"(45.2mm)
Estimated Weight: 4oz(113.4g)
15" Parachute Recovery
1/8" Launch Lug
Recommended Engines
C5-3, C6-3, Projected Maximum Altitude: 400'(122m)
Features
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Supplies Required for Assembly
Scissors
Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies Required
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies required for launch
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
Manufacturer | Estes |
---|---|
MPN | 2198 |
UPC | 047776021983 |