Hobby Zone Carbon Cub S 2 1.3m BNF Basic

Even if you've never flown a radio controlled (RC) aircraft before, the Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! Based on the Carbon Cub by CubCrafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobby's exclusive and innovative SAFE technology, this scale reproduction makes it possible for almost anyone to learn to fly successfully. And the addition of telemetry-capable and Smart components including an ESC, battery and charger (battery and charger sold separately for the BNF® Basic version), along with the option to add SAFE Plus® GPS-enabled technology and the Landing Assist Sensor (LAS), makes learning to fly even easier than ever before!

Key Features

The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
Panic Recovery mode at the push of a button to prevent loss of control and crashes
Easily upgrade to SAFE Plus GPS-enabled technology to add AutoLand, Virtual Fence and Holding Pattern features
Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
Factory-installed servos, Spektrum flight controller and serial receiver
Powerful and efficient brushless power system including a 30A telemetry-capable ESC
Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
Robust landing gear with oversized tires for operation from a variety of surfaces
Quick and easy assembly—no glue or special tools required
Durable EPO construction that's tough yet lightweight
Optional floats available for flying from water
Full line of replacement/spare parts available
Practice flying this aircraft in the RealFlight® RC flight simulator

Specs

Approximate Assembly Time: Less than an hour
Approximate Flight Time: 5 - 7 minutes
Band: 2.4GHz
Battery: Sold Separately
Battery Type: LiPo (3.7V per cell)
CG (Center of Gravity): 2.4 - 2.7" (62 - 68mm) back from the leading edge of the wing measured at the fuselage
Channels: 4
Charger: Sold Separately
Completion Level: Bind-N-Fly
Flaps: No
Flying Weight: 251-2000g
Power Type: Electric
Landing Gear: Fixed landing gear with oversize front wheels
Material: Foam
Minimum Required Radio: 4-channel
Minimum Speed Control: 30A
Motor Size: 480, 960Kv
Motor Type: Brushless
Product Length: 34" (864 mm)
Propeller Size: 9" (229 mm)
Radio Sold Separately
Receiver: Included
Recommended Motor Battery: 3S 2200mAh LiPo
Servos: Included
Speed Control: Included
Spinner Size: 1.6" (41 mm)
Transmitter Range: Full
Trim Scheme Colors: Yellow and gray
Wingspan: 51" (1295 mm)

Includes

(1) HobbyZone Carbon Cub S 2 Plane
(1) Brushless Outrunner Motor (installed)
(1) 30A Brushless ESC (installed)
(4) Servos (installed)
(1) Spektrum Flight Controller (installed)
(1) Spektrum 4650 Serial Receiver (installed)
(1) Product Manual

Requires

Full-range 6–7+ channel Spektrum DSMX®/DSM2® compatible transmitter
3S 11.1V 1300–2200mAh LiPo with EC3™ or IC3™ Connector
Compatible LiPo charger