ProBoat Aerotrooper 25" Brushless Air Boat RTR

Run the Pro Boat Aerotrooper 25-inch Brushless Air Boat practically anywhere. Even on land! Featuring a 2080kv 480 Brushless outrunner motor with 3-blade airplane-style prop mounted above the hull, you can explore large bodies of water, plant-infested swamps, small grass fields, and even snow and ice. Keeping with the theme, a tactical/military hull scheme with removable guns, molded handrails, and cage add to the scale realism. Plus, the scale cockpit with seat and steering fits most action figures. Injection molded two-piece composite canopies are durable with a secure restraint system keeping all electronics safe during use. LED lights mean the fun doesn’t stop when the sun goes down. Explore new terrain with a one-of-a-kind boating experience.

Key Features

Injection molded two-piece composite hull
Injection molded composite canopies
2080kv 480 Brushless outrunner motor
Dynamite 90 amp brushless ESC with Reverse
Scale details
LED Lights
1/10 scale metal gear waterproof 9KG servo
Composite 3-Blade, molded, pusher propeller
2.4 Transmitter and waterproof receiver

Specs

Approximate Assembly Time: Less than 1 Hour
Beam: 10.5 inches (266.7mm)
Completion Level: Ready-To-Run
Drive System: Pusher Prop
Hull Height: 8.75 inches (222.3mm)
Hull Material: Nylon composite
Motor Size: 480 Outrunner
Product Length: 25 inches (635mm)
Product Weight: 3.9 lbs (1.8 kg)
Propeller Size: 3 x 4
Radio: Included
Receiver: Included
Scale: 25 inch
Speed: 20 mph on water, 30 mph on land
Speed Control: Included
Steering: Rudder
Trim Scheme Colors: Black
Type: Airboat

Inlcudes

(1) Pro Boat® Aerotrooper™ 25-Inch Brushless RTR Air Boat
(1) Spektrum STX2® 2CH Transmitter
(1) Spektrum MRX200 2CH Receiver
(1) Pro Boat® 90A Brushless Marine ESC
(1) Spektrum 9kg Metal, Waterproof 23T Servo
(1) Dynamite 2080KV Outrunner Motor
(1) Product Manual

Required for Completion

3S or 4S 5000 mAh 50C Battery with EC3 Connector
Appropriate LiPo Battery Charger
Needle nose pliers (recommended)
Paper towel (recommended)
Rubbing alcohol (recommended)
Phillips screwdriver: #1, #2 (recommended)
Hex drivers: 1.5mm and 2mm (recommended)
Clear tape (recommended)
Marine grease and application gun (recommended)