Traxxas 6V 1200mAh 5 Cell NiMh Hump Receiver Pack

This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200 mAh.

Key Features

Fully charged, it provides about 1 hour of run time
Heavy-duty wiring provides efficient current transfer and extra protection against damage

Specs

Length: 2 (50mm)
Width: 1.2 (31mm)
Height: 1.25 (32mm)
Weight: 3.9oz (110g)
Capacity: 1200mAh
Voltage: 6.0
Length of Wire Lead: 8.5 (216mm) including connector

CAUTION

Fire Hazard! Charging and discharging batteries has the potential for fire, explosion, serious injury, and property damage if not performed per the instructions.
Before use, read and follow all manufacturer's instructions, warnings, and precautions.
Never allow children under the age of 14 to charge or use NiMH batteries without the supervision of a responsible, knowledgeable adult.

Safety Instructions

ALWAYS proceed with caution and use good common sense at all times.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children require supervisions.
DO NOT let any exposed battery contacts or wires touch each other. This will cause the battery to short circuit and create the risk of fire.
While charging, ALWAYS place the battery in a fire retardant/fire proof container and on a non-flammable surface such as concrete.
DO NOT operate the charger inside of an automobile.
NEVER charge batteries in a well-ventilated area.
REMOVE flammable items and combustible materials from the charging area.
DO NOT operate the charger in a cluttered space or place objects on top of the charger or battery.
If any battery or battery cell is damaged in any way, do NOT charge, discharge, or use the battery.
Keep a Class D fire extinguisher nearby in case of fire.
BEFORE you charge, ALWAYS confirm that the charger settings exactly match the type (chemistry), specification, and configuration of the battery to be charged.
DO NOT exceed the battery manufacturer's maximum recommended charge rate.
DO NOT disassemble, crush, short circuit, or expose the batteries or cells to flame or any other source of ignition.
If a battery gets hot to the touch during the charging process, disconnect the battery from the charger and discontinue charging immediately.
DO NOT leave the charger and battery unattended while charging, discharging, or any time that the charger is ON with battery connected.
If there are any signs of a malfunction or in the event of an emergency, unplug the charger from the power source and disconnect the battery from the charger.
ALWAYS unplug the charger and disconnect the battery from the charger.
Never connect more than one battery at a time to the charger.
DO NOT disassemble the charger.
REMOVE the battery from your model or device before charging.
DO NOT expose the charger to water or moisture.
ALWAYS store battery packs safely out of the reach of children and pets.
DO NOT charge batteries under ANY of the following conditions: Batteries that are hot to the touch, batteries that are not expressly stated by the manufacture to be suitable to accept the power output (voltage and amperage) the charger delivers during the charging process, batteries that are damaged or defective in any way- examples of damage or defects include, but are not limited to, batteries with dented cells, damaged or frayed wires, loose connections, fluid leaks, corrosion, plugged vents, swelling, cell deformity, impact damage, missing labels, melted components, or any other signs of damage. Battery packs that have been altered from original manufacturer configuration, and non-rechargeable batteries (explosion hazard).