Traxxas 7600mAh 7.4v 2S 25C LiPo Battery iD Plug

Traxxas’ 7600mAh Power Cell iD LiPo packs are ideal for all Slash, Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, E-Revo Brushless, and Spartan models. Power Cell LiPo packs are engineered to give the punch and on-demand power to reach the top speeds Traxxas models are built to achieve. Premium LiPo cells developed specifically for Traxxas feature over sized discharge tabs for maximum efficiency. The cells are hard-wired with 12-gauge Maxx® Cable, eliminating the resistance and power-loss associated with plug-in wires. Integrated balance connectors make it simple to charge with the #2970 EZ-Peak Plus LiPo/NiMH charger with iD, and the Traxxas High-Current Connector assures total power transfer for higher speeds, longer run time, and more fun from every charge. The packs’ semi-rigid construction results in a firm, rugged, and compact pack that does not require a hard case, and the center-wire configuration assures a pinch-free fit in Traxxas vehicles. Covered under Traxxas' Lifetime Battery Exchange Program.

Specs

Configuration: 2S2P
Continuous Discharge: 25C (190A)
Max Burst Rate: 50C (380A)
Watt Hours: 56.24
Charge Rate: 1C (7.6A)
Max Charge Rate: 2C (15.2A)
Dimensions: 6.1 x 0.98 x 1.8" (155 x 25 x 45mm)
Weight: 13.2oz (375g)

CAUTION

Read and follow all manufacturer's charging and handling instructions, warnings, and precautions before use!
LiPo batteries pose a severe risk of fire if not properly handled and charged per the instructions.
Never allow children under 14 years old to charge batteries without the supervision of a responsible, knowledgeable adult

Safety instructions

While charging, always place the battery in a fire retardant/fire proof container and on a non-flammable surface such as concrete.
ALWAYS charge batteries in a well-ventilated area.
REMOVE flammable items and combustible materials from the charging area.
Use ONLY a Traxxas iD equipped LiPo charger with this battery.
DO NOT charge with a NiMh only charger.
If any battery or cell is damaged in any way, do NOT charge, discharge, or use the battery.
ALWAYS confirm charger settings match this battery prior to charging.
Do NOT exceed the maximum recommended charge rate.
Do NOT disassemble, crush, short circuit, or expose to flame.
NEVER leave batteries unattended during charging